The best way to test the lighting functions on your 4-pole harness # 118334 is to disconnect the trailer and apply a circuit tester like # PTW2993 to the connector's pins. You'll need a helper in the Grand Voyager to activate the light functions while you apply the grounded tester to one circuit at a time. The linked video shows how the tester works to tell you when a signal is present.
On your 4-pole wiring setup the brown wire carries running lights (on when your headlights are on) and... view full answer...
I recommend testing the wiring harness for a malfunction. Using a circuit tester, like # PTW2993, test the wires going into the converter box for the proper function. If, when you test the right blinker, the signal is absent or otherwise incorrect, then there is a problem with the vehicle wiring, possibly a ground problem with the right taillight.
If the functions are all correct, test the wiring coming out of the converter box. If the signals going in are correct, but wrong coming out,... view full answer...
There's a couple of options for carrying bikes with the Pro Series # 63153.
If you don't mind removing the bike's front wheel, the Swagman # S62FR would be a good choice for bikes with a 9mm skewer diameter, and would allow you to carry one bike on your carrier. Installing wheel hoops like part # CC-125 would also work well, allowing you to carry two bikes.
If you're speaking of installing a bike rack into the back of the shank of the cargo carrier, that's not possible with this cargo... view full answer...
If you have theDraw-Tite Max-Frame Trailer Hitch # 75119 on your 1998 Plymouth Grand Voyager, you will be happy to know that it does fit your 2007 Dodge Grand Caravan as well, providing your Dodge does NOT have the stow and go seating.
If your Dodge DOES have the stow and go seating then the Curt Trailer Hitch # 13389 is the correct hitch for your minivan.
Hitches can be swapped out between vehicles, however, the attachment hardware is not meant to be reused under any circumstances. Replacement... view full answer...
The 1999 Plymouth Grand Voyager has a T-One Vehicle wiring harness, part # 118334, that allows you to plug into the connection points located behind the vehicle tail lights and converter is included. This harness requires no splicing or taping. A 4 pole flat adapter is included. The whole part is plug and play making install very simple. I have included a link to the part and the instructions below. view full answer...
I do have a solution for you, however the Draw-Tite model 02203 trailer hitch that you mentioned looks like an older model hitch that has since been discontinued. From what I could find, this particular hitch was designed to fit certain midsize trucks from Chevy and Dodge from 1985 to 1991. This hitch will not fit your 2000 Plymouth Grand Voyager.
For your vehicle, I instead recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75119. This custom-fit, Class III hitch is confirmed... view full answer...
Go To Results